You have received a package for each element of your Collect Cabinet.

Download the Collect cabinet manual as a PDF here


1. Keep the following tools to hand:
1x 6mm Allen key and a Phillips screwdriver.
(not included)


2. Check that every piece of furniture you ordered is in the package.


3. Pull the drawer out until it is fully open. On the underside of the runner there is an orange element; press it in and the drawer can be lifted out of the cabinet.


4. Place the cabinet element upside down on the floor. Always lay a soft cloth underneath the parts. Turn screw (C) into the base panel of the cabinet. Place the plinth on top and tighten the screw on the inside of the plinth using the Phillips screwdriver.


5. Turn the cabinet over so that it stands on the plinth.


6. Place the intermediate panel on top.


7. Fix the intermediate panel with the second cabinet on top using 4x M6 (B). Repeat this step for each additional cabinet.


8. Pull the runners all the way out. Place the drawer on the runners and push the drawer into the cabinet. You will hear a ‘click’ when it is fully closed.


9. Fit the wooden knobs by turning them clockwise into the pre-drilled holes.


10. Your Studio HENK Collect Cabinet is ready to use!