You have received two packages for the assembly of your new Grid pendant lamp. One contains the shade, the other the lamp fixture.

Download the Grid pendant lamp manual as a PDF here


1. Check that all parts of the Grid pendant lamp you ordered are in your package.
Unpack the shade (A) and the fixture parts B and C from the packaging.


2. See the image above for the order of assembling the Grid pendant lamp.


3. Clamp the shade between the two parts and tighten with part C*.


4. IMPORTANT! ALWAYS TURN OFF THE POWER BEFORE STARTING THE INSTALLATION.
To attach the metal part inside the ceiling cap to the ceiling, you need to mark the holes. Check the accuracy of the markings before drilling the holes.


5. Unscrew the plastic elements from the ceiling cap (part "D"), then thread them together with the ceiling cap around the cable, ensuring the metal part is also around the cable. Then attach a terminal block to the two cables (not included in the packaging).


6. There are usually 3 cables coming from the ceiling: the earth wire (green/yellow), the neutral wire (blue, B), Live wire (brown, C). Only firmly attach the cable ends of B and C to the terminal block.


7. Set the correct cable length by pulling the cable up and securing it with the two plastic parts.


8. Set the correct cable length by pulling the cable up and securing it with the two plastic parts.


9. PLEASE NOTE!
The Grid Light shade is made from a natural material. It is possible that the material still needs to settle. For the first few weeks after hanging, the lamp shade will hang quite straight. Depending on the weather conditions and the climate in the home, the lamp will have taken its final shape after approximately two to three weeks.

*PLEASE NOTE!
The Grid Light fitting is made from a natural material. Ensure that the glass of the light source to be used never touches the fitting to prevent melting.

Use LED lamps only. The fitting is not suitable for incandescent bulbs.