Depending on the cabinet you have ordered, there will be a number of vertical shelves and a number of horizontal shelves in the box. You have also received oak wedges to secure the shelves.

Download the Column cabinet manual as a PDF here


1. Check that every part of the Column cabinet you ordered is in your package.


2. Place the vertical shelves upright as shown in the drawing above. Make sure that the cut-outs for the shelves face the ceiling (Place something soft under the shelves).


3. Slide the first horizontal shelf into the designated cut-outs, do this slowly and carefully to avoid unnecessary scratches.


4. Place the other shelves as in step 3.


5. Make sure all shelves are straight in the frames. Now you can start placing the oak wedges in the designated holes.


6. Slide the oak wedges into the holes, pay close attention to the illustration above. You do not need a hammer to place the wedges. Push the wedge through with your thumb.


7. Once all the oak wedges are in the holes, you can carefully stand the cabinet upright and place it in the desired spot.


8. Make sure the cabinet is stable by tightening the adjustable feet. The adjustable feet are on the bottom of the vertical shelves.


9. Mount the cabinet to the wall using the keyholes on the back of the cabinet. For this step, you will need screws and plugs that can go into the wall.


10. Your new Column Cabinet is ready for use. Enjoy!