You have received a package for each element of your Collect Cabinet.

Download the Collect cabinet manual as PDF here


1. Have the following tools ready:
1x Allen key 6mm and a Phillips screwdriver.
(not included)


2. Check that every ordered piece of furniture is in the package.


3. Open the drawer completely. On the bottom of the slide, there is an orange element, push it in and the drawer can be lifted out of the cabinet.


4. Place the cabinet element upside down on the floor. Always place a soft cloth under the parts. Turn screw (C) into the base plate of the cabinet. Place the plinth on top and secure the screw to the inside of the plinth with the Phillips screwdriver.


5. Turn the cabinet so that it stands on the plinth.


6. Place the intermediate plate on top.


7. Secure the intermediate plate with the second cabinet on top with 4x M6 (B). Repeat this step for each additional cabinet.


8. Extend the runners completely. Place the drawer on the runners and push the drawer into the cabinet. You will hear a 'click' sound when it is fully closed.


9. Attach the wooden door knobs by turning them clockwise into the provided holes.


10. Your Studio HENK Collect Cabinet is ready to use!