In addition to the wall shelf, the packaging also contains a number of shelf supports, depending on the size you ordered.

Download the Blob wall shelf manual as PDF here

Download the drilling template as PDF here

1. Have the following tools ready: hammer, spirit level, drill, Torx screwdriver (T25) and wall plugs (M8) (depends on the type of wall).


2. Check if all parts of the Blob wall shelf you ordered are in your package.


3. On the last page of this manual, you will find templates for the correct drill holes per shelf size. Cut these out and glue the paper strips together.


4. Hang the template on the wall and drill through the indicated holes in the wall. Then carefully remove the template from the wall. Push wall plugs into all holes; the type of wall plug you need depends on the type of wall.


5. Now screw part (A) of the shelf support into the wall with a Torx screwdriver (T25). Then hand-tighten part (B) of the shelf support onto parts (A).


6. Now carefully slide the shelf onto the shelf supports. The shelf supports can still be adjusted slightly with a spanner to ensure the shelf is securely clamped and hangs straight.