You have received two packages for assembling your new Grid pendant lamp. One contains the shade, the other the lamp fitting.

Download the Grid pendant lamp instructions as a PDF here


1. Check that every part of the Grid pendant lamp you ordered is included in your package.
Take the shade (A) and fitting parts B and C out of the packaging.


2. The image above shows the order in which to assemble the Grid pendant lamp.


3. Clamp the shade between the two parts and tighten using part C*.


4. IMPORTANT! ALWAYS SWITCH OFF THE POWER BEFORE YOU BEGIN THE INSTALLATION
To fix the metal part inside the ceiling rose to the ceiling, you need to mark the holes. Check that the markings are accurate before you drill the holes.


5. Unscrew the plastic elements of the ceiling rose (part “D”), then thread them together with the ceiling rose onto the cable, making sure the metal part is also around the cable. Then attach a connector block to the two cables (not included in the packaging).


6. There are usually 3 cables coming out of the ceiling: the earth wire (green/yellow), the neutral wire (blue, B) and the live wire (brown, C). Only attach the cable ends of B and C securely to the connector block.


7. Set the correct cable length by pulling the cable up and fastening the two plastic parts together.


8. Set the correct cable length by pulling the cable up and fastening the two plastic parts together.


9. PLEASE NOTE!
The Grid Light shade is made from a natural material, which may still need time to settle. During the first few weeks after hanging, the lamp shade will still hang fairly straight. Depending on the weather conditions and the climate in your home, the lamp will take on its final shape after around two to three weeks.

*PLEASE NOTE!
The Grid Light fitting is made from a natural material. Make sure the glass of the light source you use never touches the fitting, to prevent melting.

Only use LED bulbs. The fitting is not suitable for incandescent bulbs.