You should have received two packages with the order of your Grid Light. One includes the lampshade and the other consists of the light fixture. 

Download the Grid Light manual as a PDF


1. Check that every part of the Grid Light you ordered is in your package. Unpack the lampshade (A) and the fixture parts B, C and E.


2. Please see how to assemble the Grid Light in the image above. 


3. Clamp the lampshade between the two parts and tighten with part C*. 


4. IMPORTANT! ALWAYS SHUT OFF POWER TO THE CIRCUIT BEFORE STARTING INSTALLATION WORK
To attach the metal part that is inside the ceiling cap to the ceiling, you need to mark the holes. Double-check the accuracy of the markings before proceeding to drill the holes.


5. Unscrew the two plastic parts from the ceiling cap (marked as “D”) than thread these plastic parts around the cable with the ceiling cap inbetween, be ensure that the metal part is inside. Connect than two wire ends with a terminal block (not included)


6. On your ceiling you will see 3 wire ends: the Earth wire (green/yellow, A), neutral wire (Blue, B), Live wire (brown, C). Only connect the wire ends B and C to the terminal block.


7. To determine the correct cable length, pull it upwards and secure it with the two plastic parts.


8. Take the metal part inside the ceiling cap (part D) and mount it to the ceiling with two screws and the correct type of plug. You can use the screws on the sides of the ceiling cap to secure it.


9. PLEASE BE AWARE!
The shade of the Grid Light is made from a natural material, which means it may need some time to adjust. About three weeks after you hang the lamp, the shade may start to sag the most. To fix this, follow steps two and three of this manual to flip the shade over. After flipping it, the lamp will take one to two weeks to settle into its final shape.

*PLEASE BE AWARE!
The Grid Light fitting is made from a natural material. Ensure that the glass of the applied light source never touches the fitting to prevent fusion.

Use only LED bulbs. The fitting is not suitable for incandescent bulbs.